2023 Pans Marine P355 Safety

1. Towing eye: Manufactured from 316 chromium. The inner reel is polyethylene. With 3 inserts placed in the polyethylene body, to increase the strength 5 times.
2. Cleats (3 Pieces): Manufactured from 316 chromium, it has a special design that maximizes durability. The base of the design is 3mm, the reel is 22mm and the top is 4mm. With extra inserts placed in the polyethylene body, the strength has been increased 5 times.
3. Chrome railing (2 Pieces): Made of 316 quality chrome with a diameter of 26mm.
4. Storage box (1 Piece): Integrated with the body. It has a volume of 55 litres. The lid is made of polyethylene. It has 2 hinges. Hinges are 316 quality chromium.
5. Wall cap (2 Pieces): Suitable to use as an extra storage area. It can be used to access the area between the walls.
6. Seat (1 Piece): Reinforced with the skeleton placed inside and designed as an addition to the body. It can be removed and installed as desired.
7. Seat (1 Piece): Reinforced with the skeleton placed inside and designed as an addition to the body. It can be removed and installed as desired.
8. Rowlocks (2 pieces): These are not fixed and can be added by the client if required.
9. Water evacuation stopper (2 Pieces): Allows the water on the boat to be discharged out of the drain channels when desired.
10. Engine transom (1 Piece): 18mm plywood is fixed into the rotational polyethylene. By preventing direct contact with the water it becomes equally lasting with the polyethylene body.
11. Chrome transom plate (1 Piece): Made of 3mm 316 quality chrome. A ridged surface has been created to prevent the engine from sliding.

Epropulsion - Spirit 1.0 Plus Electric Outboard Short Shaft - Tiller Steer (£1,800.00 Inc Vat)

Extreme Trailers

EXT500 BUNK - £1,177.00 Inc Vat

Extreme 500kg Bunked Galvanised Boat Trailer.

Suitable for -

• Dinghies up to 15' (with overhang)

• Hard Boats up to 12'

• Ribs up to 4.3m 

With a trailer weight of 125kg it can take a boat weight up to 375kg.

Designed and manufactured in the UK.

Standard features include:

• Heavy duty frame

• Waterproof sealed bearings 

• 1.6m bunks

• Heavy duty height keel rollers

• Fixed height winch post

• 10" wheels

• 48mm jockey wheel

• 1000lb winch

• Light board on extendable bars

Overall length: 4.20m

Overall width:  1.55m

Thames Boat House Ltd offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant its suitability for use. A buyer should instruct his agents and surveyors to investigate such details as the buyer desires validated. Unless otherwise stated the vendor is not selling in the course of business and this vessel is offered subject to prior sale, price change, or withdrawal without notice.